Microsoft (R) Program Maintenance Utility Version 14.29.30148.0
Copyright (C) Microsoft Corporation.  All rights reserved.

WARNING: Package(s) not found: gdal-utils
WARNING: Package(s) not found: gdal-utils
Warning 1: Cannot register table in dashboard with cdb_cartodbfytable() since its SRS is not EPSG:4326. Check the documentation for more information
ERROR 1: HTTP error code : 404
ERROR 1: RunCopyFrom Error Message:HTTP error code : 404
Warning 1: Integer overflow occurred when trying to set 32bit field.
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Dangerous block recursion detected. Some blocks have not been inserted.
Warning 1: Dangerous block recursion detected. Some blocks have not been inserted.
ERROR 1: HTTP error code : 404
ERROR 1: HTTP error code : 404
ERROR 1: HTTP error code : 404
ERROR 1: IllegalArgumentException: point array must contain 0 or >1 elements

ERROR 1: IllegalArgumentException: point array must contain 0 or >1 elements

ERROR 1: IllegalArgumentException: point array must contain 0 or >1 elements

ERROR 1: IllegalArgumentException: point array must contain 0 or >1 elements

ERROR 1: TopologyException: side location conflict at 0.25 0.25. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0.25 0.25. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0.25 0.25. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0.25 0.25. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0.25 0.25. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0.25 0.25. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0.25 0.25. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0.25 0.25. This can occur if the input geometry is invalid.
Warning 1: Empty Spatial Reference
noname.xml:-1: error : unterminated entity reference            name
Warning 1: Error opening \table5 (General function failure.). Skipping it. Might be due to unsupported spatial reference system. Using OpenFileGDB driver or FileGDB SDK >= 1.4 should solve it
ERROR 1: ICreateFeature: NULL geometry not supported with spatial index
ERROR 6: OGR geometry type unsupported as a GeoJSON geometry detected. Feature gets NULL geometry assigned.
ERROR 6: SFCGAL support not enabled.
ERROR 6: SFCGAL support not enabled.
ERROR 1: TopologyException: side location conflict at 0 0. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0 0. This can occur if the input geometry is invalid.
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: TopologyException: side location conflict at 2 -1.7320508075689562. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 2 -1.7320508075689562. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 2 -1.7320508075689562. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 2 -1.7320508075689562. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 713229.26899999997 5322983.8559999997 587.66300000000001. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 713229.26899999997 5322983.8559999997 587.66300000000001. This can occur if the input geometry is invalid.
Warning 1: Field with same name (name) already exists in (gnis_pop). Skipping newer ones
Warning 1: Field with same name (name) already exists in (gnis_pop). Skipping newer ones
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
ERROR 1: Could not resolve host: not_existing_host
ERROR 1: XML parsing of GML file failed : not well-formed (invalid token) at line 18, column 2
ERROR 1: XML parsing of GML file failed : not well-formed (invalid token) at line 18, column 2
Warning 1: The output driver does not seem to natively support Integer64 type for field EAS_ID. Converting it to Real instead. -mapFieldType can be used to control field type conversion.
ERROR 6: SQL SQLite dialect not supported due to GDAL being built without sqlite3ext.h header
Warning 1: Non-conformant content for record 1 in column field_datetime6, 2016-06-30T12:34:56Z, successfully parsed
Warning 1: Relationship mapping table my_mapping_table does not exist
ERROR 1: Cannot find table origin_table2
ERROR 1: Cannot find table dest_table2
Warning 1: Registering non-standard gpkg_geom_TIN extension
Warning 1: Field count of table SURFC_TOP__Flaechenelement_Geometrie doesn't match. 2 declared, 3 found (e.g. ignored LINEATTR)
Warning 1: Field count of table SURFC_TOP__Flaechenelement_Geometrie doesn't match. 2 declared, 3 found (e.g. ignored LINEATTR)
Warning 6: Failed to add new definition to existing layers, attributes not saved: Language, Text, 
Warning 1: Ring Self-intersection at or near point 148260.37899999999 451929.54999999999
Warning 1: Self-intersection at or near point 247452.48925784166 480187.30535729841
Warning 1: Self-intersection at or near point 247452.48925784166 480187.30535729841
Warning 1: Self-intersection at or near point 247452.48925784166 480187.30535729841
Warning 6: 'unsupported' is an unexpected value for EXTENT_UNITS creation option of type string-select.
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: Unable to initialize connection to the server for MSSQL:server=127.0.0.1;database=TestDB;driver=ODBC Driver 17 for SQL Server;UID=SA;PWD=DummyPassw0rd,

Try specifying the driver in the connection string from the list of available drivers:
Driver da Microsoft para arquivos texto (*.txt; *.csv)
Driver do Microsoft Access (*.mdb)
Driver do Microsoft dBase (*.dbf)
Driver do Microsoft Excel(*.xls)
Driver do Microsoft Paradox (*.db )
Microsoft Access Driver (*.mdb)
Microsoft Access-Treiber (*.mdb)
Microsoft dBase Driver (*.dbf)
Microsoft dBase-Treiber (*.dbf)
Microsoft Excel Driver (*.xls)
Microsoft Excel-Treiber (*.xls)
Microsoft ODBC for Oracle
Microsoft Paradox Driver (*.db )
Microsoft Paradox-Treiber (*.db )
Microsoft Text Driver (*.txt; *.csv)
Microsoft Text-Treiber (*.txt; *.csv)
SQL Server
ODBC Driver 17 for SQL Server
SQL Server Native Client 11.0

ERROR 1: MySQL connect failed for: autotest
Can't connect to MySQL server on 'localhost' (10061)
Warning 1: Overwriting existing property AX_Flurstueck.zeigtAufExternes|AA_Fachdatenverbindung|art of value 'http://www.bezreg-koeln.nrw.de/extra/33alkis/art.htm#5200' with 'http://www.bezreg-koeln.nrw.de/extra/33alkis/art.htm#5300' (gml_id: DENW44AL00003IkM20110429T070635Z; type:1).
Warning 1: Overwriting existing property AX_Flurstueck.zeigtAufExternes|AA_Fachdatenverbindung|fachdatenobjekt|AA_Fachdatenobjekt|name of value '1988/     -' with '2007/15545-53' (gml_id: DENW44AL00003IkM20110429T070635Z; type:1).
Warning 1: Overwriting existing property AX_Flurstueck.weistAuf of value 'DENW44AL0000ol5r' with 'DENW44AL00003SGP' (gml_id: DENW44AL00003IkM20110429T070635Z; type:1).
ERROR 1: Invalid layer name: foo
ERROR 1: Invalid layer name: foo
Warning 1: Cannot use /vsimem/test_ogr_openfilegdb_read_broken_spx_wrong_index_depth.gdb/a00000009.spx as the index depth(=1) is suspicious (it should rather be 2)
ERROR 1: TopologyException: side location conflict at 0.20000000000000001 0.20000000000000001. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0.20000000000000001 0.20000000000000001. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0.20000000000000001 0.20000000000000001. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0.20000000000000001 0.20000000000000001. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0.20000000000000001 0.20000000000000001. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0.20000000000000001 0.20000000000000001. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0.20000000000000001 0.20000000000000001. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0.20000000000000001 0.20000000000000001. This can occur if the input geometry is invalid.
Warning 1: VAR_TITLE not defined. Using test.xml by default
Warning 1: ${INVESTIGATION_AREA_NAME} could not be substituted
Warning 1: ${OBSERVING_SYSTEM_NAME} could not be substituted
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
ERROR 6: SQL SQLite dialect not supported due to GDAL being built without sqlite3ext.h header
ERROR 1: Deleting tmp/ogr_s57_9.000 failed:
Permission denied
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: TopologyException: side location conflict at 0 1. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0 1. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0 0 5. This can occur if the input geometry is invalid.
ERROR 1: TopologyException: side location conflict at 0 0 5. This can occur if the input geometry is invalid.
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
ERROR 6: SQL SQLite dialect not supported due to GDAL being built without sqlite3ext.h header
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
ERROR 1: IllegalArgumentException: Points of LinearRing do not form a closed linestring
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
SRID=123456 isn't defined in the EPSG inlined dataset
CreateSpatialIndex() error: either "test"."GEOMETRY" isn't a Geometry column or a SpatialIndex is already defined
Warning 6: SXF. Given material may be rotated in the conditional system of coordinates
Warning 0: RSC head read failed
Warning 6: SXF. Given material may be rotated in the conditional system of coordinates
ERROR 6: SQL SQLite dialect not supported due to GDAL being built without sqlite3ext.h header
TypeError: basic_test_15_cbk_no_argument() takes 0 positional arguments but 3 were given
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
Warning 1: Raster extent partially outside of tile matrix bounding box. Clamping it to it
Warning 1: /vsimem/cog.tif: The IFD has been rewritten at the end of the file, which breaks COG layout.
Warning 6: Unable to identify Erdas units matching Clarke's link/0.201166m, output units will be wrong.
Warning 1: CRS EPSG:3410 is deprecated. Its non-deprecated replacement EPSG:6933 will be used instead. To use the original CRS, set the OSR_USE_NON_DEPRECATED configuration option to NO.
Warning 1: CRS EPSG:3786 is deprecated. Its non-deprecated replacement EPSG:4088 will be used instead. To use the original CRS, set the OSR_USE_NON_DEPRECATED configuration option to NO.
Warning 1: CRS EPSG:29100 is deprecated. Its non-deprecated replacement EPSG:29101 will be used instead. To use the original CRS, set the OSR_USE_NON_DEPRECATED configuration option to NO.
ERROR 1: This TIFF dataset has already an internal mask band
ERROR 1: This TIFF dataset has already an internal mask band
ERROR 1: This TIFF dataset has already an internal mask band
ERROR 1: This TIFF dataset has already an internal mask band
Warning 1: Line 0: Attribute value should be single or double quoted.  Going on, but this is invalid XML that might be rejected in future versions.
ERROR 6: non-numeric buffer data type not supported in SWIG bindings
ERROR 6: non-numeric buffer data type not supported in SWIG bindings
ERROR 6: non-numeric buffer data type not supported in SWIG bindings
ERROR 6: non-numeric buffer data type not supported in SWIG bindings
ERROR 6: non-numeric buffer data type not supported in SWIG bindings
ERROR 6: non-numeric buffer data type not supported in SWIG bindings
ERROR 6: non-numeric buffer data type not supported in SWIG bindings
ERROR 6: non-numeric buffer data type not supported in SWIG bindings
ERROR 1: A dimension with same name already exists
ERROR 1: A dimension with same name already exists
Warning 1: Using PIXELTYPE=SIGNEDBYTE with Byte data type is deprecated (but still works). Using Int8 data type instead is now recommended.
Warning 1: Using PIXELTYPE=SIGNEDBYTE with Byte data type is deprecated (but still works). Using Int8 data type instead is now recommended.
ERROR 4: data\idontexist.tif: No such file or directory
ERROR 4: data\idontexist.tif: No such file or directory
ERROR 4: data\idontexist.tif: No such file or directory
Warning 1: tmp/byte.tif: A geotransform previously set is going to be cleared due to the setting of GCPs.
ERROR 1: Raster has no NoData
Warning 1: Extension for a 1-band netpbm file should be .pgm
Warning 1: Extension for a 1-band netpbm file should be .pgm
Warning 1: Extension for a 1-band netpbm file should be .pgm
ERROR 4: Unable to open tmp/ovr9.tif to obtain file list.
Warning 1: CRS EPSG:27582 is deprecated. Its non-deprecated replacement EPSG:27572 will be used instead. To use the original CRS, set the OSR_USE_NON_DEPRECATED configuration option to NO.
Warning 1: data/huge4GB.tif: TIFFReadDirectory:Bogus "StripByteCounts" field, ignoring and calculating from imagelength
Warning 1: data/block_width_above_32bit.tif: data/block_width_above_32bit.tif:Nonstandard tile length 1, convert file
Warning 1: TIFFReadDirectory:Bogus "StripByteCounts" field, ignoring and calculating from imagelength
Warning 1: data/toomanyblocks.tif: data/toomanyblocks.tif:Nonstandard tile width 1, convert file
Warning 1: data/toomanyblocks.tif: data/toomanyblocks.tif:Nonstandard tile length 1, convert file
Warning 1: data/toomanyblocks_separate.tif: data/toomanyblocks_separate.tif:Nonstandard tile width 1, convert file
Warning 1: data/toomanyblocks_separate.tif: data/toomanyblocks_separate.tif:Nonstandard tile length 1, convert file
Warning 1: data/toomanyblocks_separate.tif: TIFFReadDirectory:Sum of Photometric type-related color channels and ExtraSamples doesn't match SamplesPerPixel. Defining non-color channels as ExtraSamples.
Warning 1: TIFFFetchStripThing:Incorrect count for "StripByteCounts"; tag ignored
Warning 1: TIFFFetchStripThing:Incorrect count for "StripByteCounts"; tag ignored
127.0.0.1 - - [20/Apr/2023 02:21:30] code 500, message Unexpected GET request for /, req_count = 2
127.0.0.1 - - [20/Apr/2023 02:21:30] code 500, message Unexpected HEAD request for /cog.tab, req_count = 2
Warning 1: HTTP response code on http://localhost:8080/cog.tab: 500
127.0.0.1 - - [20/Apr/2023 02:21:30] code 500, message Unexpected HEAD request for /cog.TAB, req_count = 2
Warning 1: HTTP response code on http://localhost:8080/cog.TAB: 500
127.0.0.1 - - [20/Apr/2023 02:21:30] code 500, message Unexpected HEAD request for /cog.tfw, req_count = 2
Warning 1: HTTP response code on http://localhost:8080/cog.tfw: 500
127.0.0.1 - - [20/Apr/2023 02:21:30] code 500, message Unexpected HEAD request for /cog.TFW, req_count = 2
Warning 1: HTTP response code on http://localhost:8080/cog.TFW: 500
127.0.0.1 - - [20/Apr/2023 02:21:30] code 500, message Unexpected HEAD request for /cog.tifw, req_count = 2
Warning 1: HTTP response code on http://localhost:8080/cog.tifw: 500
127.0.0.1 - - [20/Apr/2023 02:21:30] code 500, message Unexpected HEAD request for /cog.TIFW, req_count = 2
Warning 1: HTTP response code on http://localhost:8080/cog.TIFW: 500
127.0.0.1 - - [20/Apr/2023 02:21:30] code 500, message Unexpected HEAD request for /cog.wld, req_count = 2
Warning 1: HTTP response code on http://localhost:8080/cog.wld: 500
127.0.0.1 - - [20/Apr/2023 02:21:30] code 500, message Unexpected HEAD request for /cog.WLD, req_count = 2
Warning 1: HTTP response code on http://localhost:8080/cog.WLD: 500
127.0.0.1 - - [20/Apr/2023 02:21:30] code 500, message Unexpected HEAD request for /cog.tif.aux.xml, req_count = 2
Warning 1: HTTP response code on http://localhost:8080/cog.tif.aux.xml: 500
127.0.0.1 - - [20/Apr/2023 02:21:30] code 500, message Unexpected HEAD request for /cog.aux, req_count = 2
Warning 1: HTTP response code on http://localhost:8080/cog.aux: 500
127.0.0.1 - - [20/Apr/2023 02:21:30] code 500, message Unexpected HEAD request for /cog.AUX, req_count = 2
Warning 1: HTTP response code on http://localhost:8080/cog.AUX: 500
127.0.0.1 - - [20/Apr/2023 02:21:30] code 500, message Unexpected HEAD request for /cog.tif.aux, req_count = 2
Warning 1: HTTP response code on http://localhost:8080/cog.tif.aux: 500
127.0.0.1 - - [20/Apr/2023 02:21:30] code 500, message Unexpected HEAD request for /cog.tif.AUX, req_count = 2
Warning 1: HTTP response code on http://localhost:8080/cog.tif.AUX: 500
Warning 1: WEBP_LEVEL is specified, but WEBP_LOSSLESS=YES. WEBP_LEVEL will be ignored.
Warning 1: CRS EPSG:3408 is deprecated. Its non-deprecated replacement EPSG:6931 will be used instead. To use the original CRS, set the OSR_USE_NON_DEPRECATED configuration option to NO.
Warning 1: CRS EPSG:32663 is deprecated. Its non-deprecated replacement EPSG:4087 will be used instead. To use the original CRS, set the OSR_USE_NON_DEPRECATED configuration option to NO.
Warning 1: CRS EPSG:4088 is deprecated. Its non-deprecated replacement EPSG:4087 will be used instead. To use the original CRS, set the OSR_USE_NON_DEPRECATED configuration option to NO.
Warning 1: CRS EPSG:2934 is deprecated. Its non-deprecated replacement EPSG:3000 will be used instead. To use the original CRS, set the OSR_USE_NON_DEPRECATED configuration option to NO.
Warning 1: CRS EPSG:4328 is deprecated. Its non-deprecated replacement EPSG:4978 will be used instead. To use the original CRS, set the OSR_USE_NON_DEPRECATED configuration option to NO.
ERROR 1: PROJ: proj_as_proj_string: Unsupported conversion method: Lambert Conic Near-Conformal
Warning 1: tmp/tiff_write_96_dst.tif, band 2: One or more pixels clipped to fit 7 bit domain.
Warning 1: /vsimem/test_tiff_write_ifd_offsets.tif: A strile cannot be rewritten in place, which invalidates the BLOCK_ORDER optimization.
Warning 1: /vsimem/test_tiff_write_ifd_offsets.tif: This file used to have optimizations in its layout, but those have been, at least partly, invalidated by later changes
Warning 1: CRS EPSG:7401 is deprecated. Its non-deprecated replacement EPSG:7411 will be used instead. To use the original CRS, set the OSR_USE_NON_DEPRECATED configuration option to NO.
ERROR 1: TIFFScanlineSize:Integer overflow
ERROR 1: TIFFScanlineSize:Integer overflow
ERROR 1: TIFFReadDirectory:Cannot handle zero scanline size
ERROR 1: /vsimem/tiff_write_125.tif: TIFFScanlineSize:Integer overflow
ERROR 1: /vsimem/tiff_write_125.tif: TIFFReadDirectory:Cannot handle zero scanline size
ERROR 1: /vsimem/tiff_write_125.tif: TIFFScanlineSize:Integer overflow
ERROR 1: /vsimem/tiff_write_125.tif: TIFFReadDirectory:Cannot handle zero scanline size
ERROR 1: TIFFStripSize:Integer overflow
ERROR 1: TIFFReadDirectory:Cannot handle zero strip size
ERROR 1: /vsimem/tiff_write_125.tif: TIFFStripSize:Integer overflow
ERROR 1: /vsimem/tiff_write_125.tif: TIFFReadDirectory:Cannot handle zero strip size
Warning 1: Using PIXELTYPE=SIGNEDBYTE with Byte data type is deprecated (but still works). Using Int8 data type instead is now recommended.
Warning 1: Using PIXELTYPE=SIGNEDBYTE with Byte data type is deprecated (but still works). Using Int8 data type instead is now recommended.
Warning 1: WEBP_LEVEL is specified, but WEBP_LOSSLESS=YES. WEBP_LEVEL will be ignored.
Warning 1: WEBP_LEVEL is specified, but WEBP_LOSSLESS=YES. WEBP_LEVEL will be ignored.
Warning 1: WEBP_LEVEL is specified, but WEBP_LOSSLESS=YES. WEBP_LEVEL will be ignored.
ERROR 1: Wrong values in SrcRect
ERROR 1: Wrong values in DstRect
ERROR 5: Invalid value for GCP: invalid
  need 4, or 5 numbers, comma separated: 'gcp=<pixel>,<line>,<easting>,<northing>[,<elevation>]'
ERROR 4: `vrt://data/float32.tif?if=AAIGrid,doesnotexist' does not exist in the file system, and is not recognized as a supported dataset name.
ERROR 5: For band 1, -scale should be specified when -exponent is specified.
ERROR 1: Write operation not permitted on dataset opened in read-only mode
Bad headers: Host: 127.0.0.1:8080
User-Agent: GDAL/3.7.0
Accept: */*
x-ms-client-request-id: REQUEST_ID
Content-Type: image/tiff
Content-Length: 6
x-ms-blob-condition-appendpos: 10
x-ms-date: my_timestamp
x-ms-version: 2019-12-12
Authorization: SharedKey myaccount:lx+coswlfn1ZZ9j+fdJ8ZN0MDQBk0V53nQppHqSCL5A=
Expect: 100-continue


ERROR 1: PUT of /vsiaz/test_copy/file.tif failed
Warning 1: HTTP response code on https://naipblobs.blob.core.windows.net/naip/v002/al/2015/al_100cm_2015/30086/m_3008601_ne_16_1_20150804.tif: 409
ERROR 6: /vsicrypt/ support not available in this build
127.0.0.1 - - [20/Apr/2023 02:23:16] code 500, message Unexpected PUT request for /test_bucket/test/foo?partNumber=2&uploadId=my_id, req_count = 8
127.0.0.1 - - [20/Apr/2023 02:23:17] code 500, message Unexpected GET request for /random_write/?delimiter=%2F, req_count = 0
127.0.0.1 - - [20/Apr/2023 02:23:18] code 500, message Unexpected GET request for /random_write/test.xml, req_count = 2
Warning 1: HTTP response code on http://127.0.0.1:8080/random_write/test.xml: 500
127.0.0.1 - - [20/Apr/2023 02:23:18] code 500, message Unexpected GET request for /random_write/?delimiter=%2F&max-keys=100&prefix=test.xml%2F, req_count = 2
127.0.0.1 - - [20/Apr/2023 02:23:18] code 500, message Unexpected GET request for /random_write/test.XML, req_count = 2
Warning 1: HTTP response code on http://127.0.0.1:8080/random_write/test.XML: 500
127.0.0.1 - - [20/Apr/2023 02:23:18] code 500, message Unexpected GET request for /random_write/?delimiter=%2F&max-keys=100&prefix=test.XML%2F, req_count = 2
Warning 1: cornerPoints not consistent with resolution given in metadata
Warning 1: cornerPoints not consistent with resolution given in metadata
ERROR 4: `data/bag/invalid_bag_vlen_bag_version.bag' not recognized as a supported file format.
PAM default histogram will be overwritten.
ERROR 11: CURL error: Connection timed out after 5016 milliseconds
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
ERROR 1: PROJ: webmerc: Invalid latitude
Warning 1: Band 18 of GRIB dataset is 22x21, while the first band and dataset is 36x18.  Georeferencing of band 18 may be incorrect, and data access may be incomplete.
Warning 1: Band 7 of GRIB dataset is 103x78, while the first band and dataset is 36x18.  Georeferencing of band 7 may be incorrect, and data access may be incomplete.
Warning 1: Band 7 of GRIB dataset is 103x78, while the first band and dataset is 36x18.  Georeferencing of band 7 may be incorrect, and data access may be incomplete.
Warning 1: Band 8 of GRIB dataset is 103x78, while the first band and dataset is 36x18.  Georeferencing of band 8 may be incorrect, and data access may be incomplete.
Warning 1: Band 8 of GRIB dataset is 103x78, while the first band and dataset is 36x18.  Georeferencing of band 8 may be incorrect, and data access may be incomplete.
Warning 1: Band 9 of GRIB dataset is 28x21, while the first band and dataset is 36x18.  Georeferencing of band 9 may be incorrect, and data access may be incomplete.
Warning 1: Band 9 of GRIB dataset is 28x21, while the first band and dataset is 36x18.  Georeferencing of band 9 may be incorrect, and data access may be incomplete.
Warning 1: Band 10 of GRIB dataset is 28x21, while the first band and dataset is 36x18.  Georeferencing of band 10 may be incorrect, and data access may be incomplete.
Warning 1: Band 10 of GRIB dataset is 28x21, while the first band and dataset is 36x18.  Georeferencing of band 10 may be incorrect, and data access may be incomplete.
Warning 1: Band 11 of GRIB dataset is 28x21, while the first band and dataset is 36x18.  Georeferencing of band 11 may be incorrect, and data access may be incomplete.
Warning 1: Band 11 of GRIB dataset is 28x21, while the first band and dataset is 36x18.  Georeferencing of band 11 may be incorrect, and data access may be incomplete.
Warning 1: Band 12 of GRIB dataset is 22x21, while the first band and dataset is 36x18.  Georeferencing of band 12 may be incorrect, and data access may be incomplete.
Warning 1: Band 12 of GRIB dataset is 22x21, while the first band and dataset is 36x18.  Georeferencing of band 12 may be incorrect, and data access may be incomplete.
Warning 1: Band 13 of GRIB dataset is 22x21, while the first band and dataset is 36x18.  Georeferencing of band 13 may be incorrect, and data access may be incomplete.
Warning 1: Band 13 of GRIB dataset is 22x21, while the first band and dataset is 36x18.  Georeferencing of band 13 may be incorrect, and data access may be incomplete.
Warning 1: Band 14 of GRIB dataset is 22x21, while the first band and dataset is 36x18.  Georeferencing of band 14 may be incorrect, and data access may be incomplete.
Warning 1: Band 14 of GRIB dataset is 22x21, while the first band and dataset is 36x18.  Georeferencing of band 14 may be incorrect, and data access may be incomplete.
Warning 1: Band 15 of GRIB dataset is 22x21, while the first band and dataset is 36x18.  Georeferencing of band 15 may be incorrect, and data access may be incomplete.
Warning 1: Band 15 of GRIB dataset is 22x21, while the first band and dataset is 36x18.  Georeferencing of band 15 may be incorrect, and data access may be incomplete.
Warning 1: Band 16 of GRIB dataset is 22x21, while the first band and dataset is 36x18.  Georeferencing of band 16 may be incorrect, and data access may be incomplete.
Warning 1: Band 16 of GRIB dataset is 22x21, while the first band and dataset is 36x18.  Georeferencing of band 16 may be incorrect, and data access may be incomplete.
Warning 1: Band 17 of GRIB dataset is 22x21, while the first band and dataset is 36x18.  Georeferencing of band 17 may be incorrect, and data access may be incomplete.
Warning 1: Band 17 of GRIB dataset is 22x21, while the first band and dataset is 36x18.  Georeferencing of band 17 may be incorrect, and data access may be incomplete.
Warning 1: GRIB: Parameter 176 is > 127, so it falls in the local use section of
the parameter table (and is undefined on the international table.
Using default for now(which might lead to erroneous interpretation), but please email arthur.taylor@noaa.gov
about adding this table to his 'degrib1.c' and 'grib1tab.c' files.
Warning 1: GRIB: Parameter 176 is > 127, so it falls in the local use section of
the parameter table (and is undefined on the international table.
Using default for now(which might lead to erroneous interpretation), but please email arthur.taylor@noaa.gov
about adding this table to his 'degrib1.c' and 'grib1tab.c' files.
Warning 1: It is likely that the axis order of the GMLJP2 box is not consistent with the EPSG order and that the resulting georeferencing will be incorrect. Try setting GDAL_IGNORE_AXIS_ORIENTATION=TRUE if it is the case
Warning 1: It is likely that the axis order of the GMLJP2 box is not consistent with the EPSG order and that the resulting georeferencing will be incorrect. Try setting GDAL_IGNORE_AXIS_ORIENTATION=TRUE if it is the case
Warning 1: It is likely that the axis order of the GMLJP2 box is not consistent with the EPSG order and that the resulting georeferencing will be incorrect. Try setting GDAL_IGNORE_AXIS_ORIENTATION=TRUE if it is the case
ERROR 1: Error occurred in GDALClose()
Entity: line 1: parser error : Couldn't find end of Start Tag A line 1
<A
  ^
ERROR 11: HTTP response code: 404
Warning 1: Unrecognized crs: bogus
ERROR 1: my_ds: An existing shared dataset already has this description. This should not happen.
Warning 1: No projection origin longitude specified.  Assuming 0.0.
Warning 1: Unspecified ellipsoid.  Using wgs-84 parameters.

Warning 1: No projection origin longitude specified.  Assuming 0.0.
Warning 1: Unspecified ellipsoid.  Using wgs-84 parameters.

Warning 1: No projection origin longitude specified.  Assuming 0.0.
Warning 1: Unspecified ellipsoid.  Using wgs-84 parameters.

Warning 1: No projection origin longitude specified.  Assuming 0.0.
Warning 1: Unspecified ellipsoid.  Using wgs-84 parameters.

ERROR 4: byte.tif: No such file or directory
ERROR 4: byte.tif: No such file or directory
ERROR 4: out.mrf: No such file or directory
Warning 1: The dataset has several variables that could be identified as vector fields, but not all share the same primary dimension. Consequently they will be ignored.
Warning 6: dataset tmp/netcdf_64.nc does not support layer creation option LEGACY
Warning 1: Latitude grid not spaced evenly.  Setting projection for grid spacing is within 0.1 degrees threshold.
Warning 1: Latitude grid not spaced evenly.  Setting projection for grid spacing is within 0.1 degrees threshold.
Warning 1: Latitude grid not spaced evenly.  Setting projection for grid spacing is within 0.1 degrees threshold.
Warning 1: Latitude grid not spaced evenly.  Setting projection for grid spacing is within 0.1 degrees threshold.
Warning 1: Latitude grid not spaced evenly.  Setting projection for grid spacing is within 0.1 degrees threshold.
Warning 1: Latitude grid not spaced evenly.  Setting projection for grid spacing is within 0.1 degrees threshold.
Warning 1: dimension #1 (Latitude) is not a Longitude/X dimension.
Warning 1: dimension #0 (Longitude) is not a Latitude/Y dimension.
Warning 1: dimension #1 (Latitude) is not a Longitude/X dimension.
Warning 1: dimension #0 (Longitude) is not a Latitude/Y dimension.
Warning 1: Translation of a simple geometry layer has been terminated prematurely due to an error.
[names_geometry] The property or the variable associated with geometry_type is missing.
Warning 1: Translation of a simple geometry layer has been terminated prematurely due to an error.
Unsupported or unrecognized feature type.
Warning 1: Translation of a simple geometry layer has been terminated prematurely due to an error.
[names_geometry] The property or the variable associated with node_count is missing.
Warning 1: Translation of a simple geometry layer has been terminated prematurely due to an error.
[serpenski] One or more dimensions of X, Y and in general all node coordinate axes do not match but must match.
Warning 1: Translation of a simple geometry layer has been terminated prematurely due to an error.
[shapes] node_count values may not be negative
Warning 1: Translation of a simple geometry layer has been terminated prematurely due to an error.
[shapes] part_node_count values may not be negative
Warning 1: Translation of a simple geometry layer has been terminated prematurely due to an error.
[shapes] interior_ring values must be 0 or 1
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: dimension #1 (dim1) is not a Longitude/X dimension.
Warning 1: dimension #0 (dim0) is not a Latitude/Y dimension.
Warning 1: dimension #1 (dim1) is not a Longitude/X dimension.
Warning 1: dimension #0 (dim0) is not a Latitude/Y dimension.
ERROR 1: netcdf error #-38 : NetCDF: Operation not allowed in data mode .
at (E:\buildsystem\src\gdal-vc16\frmts\netcdf\netcdfmultidim.cpp,netCDFSharedResources::SetDefineMode,193)

ERROR 4: Unable to open /vsimem/test_nitf_create_copy_user_provided_IGEOLO_without_ICORDS.ntf to obtain file list.
Warning 6: driver NITF does not support creation option WRITE_ALL_IMAGES
ERROR 6: /vsisubfile/1702_541,tmp/nitf46.ntf: BuildOverviews() not supported for this dataset.
ERROR 1: PROJ: aea: Invalid value for lat_1 and lat_2: |lat_1 + lat_2| should be > 0
ERROR 1: PROJ: aea: Invalid value for lat_1 and lat_2: |lat_1 + lat_2| should be > 0
ERROR 1: PROJ: proj_create_conversion_utm: Invalid zone number
ERROR 1: PROJ: proj_create_projected_crs: missing required input
Warning 6: 'µµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµµ' is of size 1440, whereas maximum size for ICOM creation option is 720.
Warning 1: Cannot read User TRE. First tag's length is invalid
ERROR 1: PROJ: aea: Invalid value for lat_1 and lat_2: |lat_1 + lat_2| should be > 0
ERROR 1: PROJ: proj_create_conversion_utm: Invalid zone number
ERROR 1: PROJ: proj_create_projected_crs: missing required input
ERROR 4: `tmp\rgba16.png.001' not recognized as a supported file format.
ERROR 4: `tmp\rgba16.png.001' not recognized as a supported file format.
ERROR 1: PROJ: proj_get_ellipsoid: CRS has no geodetic CRS
ERROR 1: PROJ: proj_get_ellipsoid: Object is not a CRS or GeodeticReferenceFrame
ERROR 1: PROJ: proj_get_ellipsoid: CRS has no geodetic CRS
ERROR 1: PROJ: proj_get_ellipsoid: Object is not a CRS or GeodeticReferenceFrame
ERROR 1: PROJ: proj_get_ellipsoid: CRS has no geodetic CRS
ERROR 1: PROJ: proj_get_ellipsoid: Object is not a CRS or GeodeticReferenceFrame
ERROR 1: PROJ: proj_get_ellipsoid: CRS has no geodetic CRS
ERROR 1: PROJ: proj_get_ellipsoid: Object is not a CRS or GeodeticReferenceFrame
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
Warning 1: Non closed ring detected. To avoid accepting it, set the OGR_GEOMETRY_ACCEPT_UNCLOSED_RING configuration option to NO
ERROR 1: No display font for 'ArialNarrow'
ERROR 1: No display font for 'ArialNarrow,Bold'
ERROR 1: No display font for 'ArialNarrow,Italic'
ERROR 1: No display font for 'ArialNarrow,BoldItalic'
ERROR 1: No display font for 'ArialNarrow-Bold'
ERROR 1: No display font for 'ArialNarrow-Italic'
ERROR 1: No display font for 'ArialNarrow-BoldItalic'
ERROR 1: No display font for 'HelveticaNarrow'
ERROR 1: No display font for 'HelveticaNarrow,Bold'
ERROR 1: No display font for 'HelveticaNarrow,Italic'
ERROR 1: No display font for 'HelveticaNarrow,BoldItalic'
ERROR 1: No display font for 'HelveticaNarrow-Bold'
ERROR 1: No display font for 'HelveticaNarrow-Italic'
ERROR 1: No display font for 'HelveticaNarrow-BoldItalic'
ERROR 1: No display font for 'BookAntiqua'
ERROR 1: No display font for 'BookAntiqua,Bold'
ERROR 1: No display font for 'BookAntiqua,Italic'
ERROR 1: No display font for 'BookAntiqua,BoldItalic'
ERROR 1: No display font for 'BookAntiqua-Bold'
ERROR 1: No display font for 'BookAntiqua-Italic'
ERROR 1: No display font for 'BookAntiqua-BoldItalic'
ERROR 1: No display font for 'ArialUnicode'
Warning 1: ${LOGICAL_IDENTIFIER} could not be substituted
Warning 1: VAR_TITLE not defined. Using out.xml by default
Warning 1: ${INVESTIGATION_AREA_NAME} could not be substituted
Warning 1: ${INVESTIGATION_AREA_LID_REFERENCE} could not be substituted
Warning 1: ${OBSERVING_SYSTEM_NAME} could not be substituted
Warning 1: ${LOGICAL_IDENTIFIER} could not be substituted
Warning 1: VAR_TITLE not defined. Using out.xml by default
Warning 1: ${INVESTIGATION_AREA_NAME} could not be substituted
Warning 1: ${INVESTIGATION_AREA_LID_REFERENCE} could not be substituted
Warning 1: ${OBSERVING_SYSTEM_NAME} could not be substituted
Warning 1: ${LOGICAL_IDENTIFIER} could not be substituted
Warning 1: VAR_TITLE not defined. Using out.xml by default
Warning 1: ${INVESTIGATION_AREA_NAME} could not be substituted
Warning 1: ${INVESTIGATION_AREA_LID_REFERENCE} could not be substituted
Warning 1: ${OBSERVING_SYSTEM_NAME} could not be substituted
ERROR 6: Appending to a dataset with a different geotransform is not supported
Warning 1: ${LOGICAL_IDENTIFIER} could not be substituted
Warning 1: VAR_TITLE not defined. Using out.xml by default
Warning 1: ${INVESTIGATION_AREA_NAME} could not be substituted
Warning 1: ${INVESTIGATION_AREA_LID_REFERENCE} could not be substituted
Warning 1: ${OBSERVING_SYSTEM_NAME} could not be substituted
ERROR 6: Appending to a dataset with a different coordinate reference system is not supported
Warning 6: Ignoring false_easting. Only 0 value supported
ERROR 1: Deleting tmp/out.xml failed:
Permission denied
Warning 1: Wrong datum code 0. Supported datums are 1 - 10 only.  Falling back to use Pulkovo 42.
Warning 1: Wrong datum code 0. Supported datums are 1 - 10 only.  Falling back to use Pulkovo 42.
Warning 1: Wrong datum code 0. Supported datums are 1 - 10 only.  Falling back to use Pulkovo 42.
Warning 1: Wrong datum code 0. Supported datums are 1 - 10 only.  Falling back to use Pulkovo 42.
Warning 1: Wrong datum code 0. Supported datums are 1 - 10 only.  Falling back to use Pulkovo 42.
Warning 1: Wrong datum code 0. Supported datums are 1 - 10 only.  Falling back to use Pulkovo 42.
Warning 1: Wrong datum code 0. Supported datums are 1 - 10 only.  Falling back to use Pulkovo 42.
Warning 1: Wrong datum code 0. Supported datums are 1 - 10 only.  Falling back to use Pulkovo 42.
Warning 1: Wrong datum code 0. Supported datums are 1 - 10 only.  Falling back to use Pulkovo 42.
Warning 6: RMF driver does not support 'ft' elevation units. Possible values are: m, dm, cm, mm.
ERROR 3: Failed to read scanline 4.
ERROR 1: data/sar_ceos/ottawa_patch.img, band 1: IReadBlock failed at X offset 0, Y offset 4: Failed to read scanline 4.
ERROR 3: Checksum value could not be computed due to I/O read error.
ERROR 3: Failed to read scanline 3.
ERROR 1: data/sar_ceos/R1_26161_FN1_F164.D, band 1: IReadBlock failed at X offset 0, Y offset 3: Failed to read scanline 3.
ERROR 3: Checksum value could not be computed due to I/O read error.
ERROR 6: Only north-up geotransform with square pixels supported
Warning 1: tmp/vrtwarp_6.tif: A geotransform previously set is going to be cleared due to the setting of GCPs.
Warning 1: tmp/vrtwarp_7.tif: A geotransform previously set is going to be cleared due to the setting of GCPs.
Warning 1: for band 1, nodata value has been clamped to 255, the original value being out of range.
Warning 1: for band 2, nodata value has been clamped to 255, the original value being out of range.
Warning 1: for band 3, nodata value has been clamped to 255, the original value being out of range.
Warning 1: for band 1, nodata value has been clamped to 255, the original value being out of range.
Warning 1: for band 2, nodata value has been clamped to 255, the original value being out of range.
Warning 1: for band 3, nodata value has been clamped to 255, the original value being out of range.
Warning 1: for band 1, nodata value has been clamped to 255, the original value being out of range.
Warning 1: for band 2, nodata value has been clamped to 255, the original value being out of range.
Warning 1: for band 3, nodata value has been clamped to 255, the original value being out of range.
Warning 1: for band 1, nodata value has been clamped to 255, the original value being out of range.
Warning 1: for band 2, nodata value has been clamped to 255, the original value being out of range.
Warning 1: for band 3, nodata value has been clamped to 255, the original value being out of range.
ERROR 1: PROJ: proj_create_from_database: crs not found
ERROR 1: GDALWMS: Unable to download block 0, 0.
URL: <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>
<title>404 Not Found</title>
</head><body>
<h1>Not Found</h1>
<p>The requested URL /wms-bin/cubeserv.cgi was not found on this server.</p>
<hr>
<address>Apache/2.2.3 (Red Hat) Server at wms.geobase.ca Port 80</address>
</body></html>

  HTTP status code: 404, error: <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>
<title>404 Not Found</title>
</head><body>
<h1>Not Found</h1>
<p>The requested URL /wms-bin/cubeserv.cgi was not found on this server.</p>
<hr>
<address>Apache/2.2.3 (Red Hat) Server at wms.geobase.ca Port 80</address>
</body></html>
.
Add the HTTP status code to <ZeroBlockHttpCodes> to ignore this error (see http://www.gdal.org/frmt_wms.html).
ERROR 1: IReadBlock failed at X offset 0, Y offset 0: GDALWMS: Unable to download block 0, 0.
URL: <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>
<title>404 Not Found</title>
</head><body>
<h1>Not Found</h1>
<p>The requested URL /wms-bin/cubeserv.cgi was not found on this server.</p>
<hr>
<address>Apache/2.2.3 (Red Hat) Server at wms.geobase.ca Port 80</address>
</body></html>

  HTTP status code: 404, error: <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>
<title>404 Not Found</title>
</head><body>
<h1>Not Found</h1>
<p>The requested URL /wms-bin/cubeserv.cgi was not found on this server.</p>
<hr>
<address>Apache/2.2.3 (Red Hat) Server at wms.geobase.ca Port 80</address>
</body></html>
.
Add the HTTP status code to <ZeroBlockHttpCodes> to ignore this error (see http://www.gdal.org/frmt_wms.html).
ERROR 4: No such file or directory
ERROR 1: GDALWMS: Unable to open downloaded block.
Warning 1: Too long string truncated
Warning 1: CRS EPSG:4328 is deprecated. Its non-deprecated replacement EPSG:4978 will be used instead. To use the original CRS, set the OSR_USE_NON_DEPRECATED configuration option to NO.
ERROR 1: PROJ: pipeline: Invalid value for k/k_0: it should be > 0
ERROR 1: PROJ: Invalid ellipsoid parameters
ERROR 1: PROJ: merc: Invalid value for lat_ts: |lat_ts| should be <= 90°
ERROR 1: PROJ: pipeline: Pipeline: Bad step definition: proj=merc (Invalid value for an argument)
ERROR 1: PROJ: Invalid ellipsoid parameters
ERROR 1: PROJ: pipeline: Invalid value for k/k_0: it should be > 0
ERROR 1: PROJ: Invalid ellipsoid parameters
ERROR 1: PROJ: pipeline: Invalid value for lat_0: |lat_0| should be <= 90°
ERROR 1: PROJ: lcc: Invalid value for lat_1 and lat_2: |lat_1 + lat_2| should be > 0
ERROR 1: PROJ: pipeline: Pipeline: Bad step definition: proj=lcc (Invalid value for an argument)
ERROR 1: PROJ: lcc: Invalid value for lat_1: |lat_1| should be < 90°
ERROR 1: PROJ: pipeline: Pipeline: Bad step definition: proj=lcc (Invalid value for an argument)
ERROR 1: PROJ: lcc: Invalid value for lat_2: |lat_2| should be < 90°
ERROR 1: PROJ: pipeline: Pipeline: Bad step definition: proj=lcc (Invalid value for an argument)
ERROR 1: PROJ: pipeline: Invalid value for lat_0: |lat_0| should be <= 90°
ERROR 1: PROJ: lcc: Invalid value for lat_1 and lat_2: |lat_1 + lat_2| should be > 0
ERROR 1: PROJ: pipeline: Pipeline: Bad step definition: proj=lcc (Invalid value for an argument)
ERROR 1: PROJ: lcc: Invalid value for lat_1 and lat_2: |lat_1 + lat_2| should be > 0
ERROR 1: PROJ: pipeline: Pipeline: Bad step definition: proj=lcc (Invalid value for an argument)
ERROR 1: PROJ: Invalid ellipsoid parameters
ERROR 1: Point outside of projection domain
Warning 1: CRS EPSG:3785 is deprecated. Its non-deprecated replacement EPSG:3857 will be used instead. To use the original CRS, set the OSR_USE_NON_DEPRECATED configuration option to NO.
ERROR 1: densify_pts must be between 0-10000.
ERROR 1: missing CONVERSION node
Warning 1: +init=epsg:XXXX syntax is deprecated. It might return a CRS with a non-EPSG compliant axis order.
ERROR 1: unhandled keyword: FOO
ERROR 1: compound CRS should have at least 2 components
ERROR 1: Missing DATUM or ENSEMBLE node
ERROR 1: compound CRS should have at least 2 components
ERROR 1: compound CRS should have at least 2 components
ERROR 1: buildCS: missing UNIT
ERROR 1: Missing VDATUM or ENSEMBLE node
ERROR 1: Missing VDATUM or ENSEMBLE node
ERROR 1: Missing VDATUM or ENSEMBLE node
ERROR 1: Missing VDATUM or ENSEMBLE node
ERROR 1: Missing VDATUM or ENSEMBLE node
ERROR 1: buildCS: missing UNIT
ERROR 1: unhandled axis direction: foo
ERROR 1: not enough children in PRIMEM node
ERROR 1: not enough children in UNIT node
ERROR 1: not enough children in AXIS node
ERROR 1: Missing DATUM or ENSEMBLE node
ERROR 1: Missing DATUM or ENSEMBLE node
ERROR 1: buildCS: missing UNIT
ERROR 1: buildCS: missing UNIT
ERROR 1: unhandled axis direction: foo
ERROR 1: missing CONVERSION node
ERROR 1: missing CONVERSION node
ERROR 1: missing CONVERSION node
ERROR 1: Missing BASEGEODCRS / BASEGEOGCRS / GEOGCS node
ERROR 1: Missing BASEGEODCRS / BASEGEOGCRS / GEOGCS node
ERROR 1: Missing BASEGEODCRS / BASEGEOGCRS / GEOGCS node
ERROR 1: Missing BASEGEODCRS / BASEGEOGCRS / GEOGCS node
ERROR 1: Missing BASEGEODCRS / BASEGEOGCRS / GEOGCS node
ERROR 1: missing CONVERSION node
ERROR 1: missing CONVERSION node
ERROR 1: missing CONVERSION node
ERROR 1: missing CONVERSION node
ERROR 1: Too many points (6889 out of 6889) failed to transform, unable to compute output bounds.
ERROR 1: Passed object is neither of type string nor bytes
Warning 1: Using PIXELTYPE=SIGNEDBYTE with Byte data type is deprecated (but still works). Using Int8 data type instead is now recommended.
Warning 1: Using PIXELTYPE=SIGNEDBYTE with Byte data type is deprecated (but still works). Using Int8 data type instead is now recommended.
Warning 1: Self-intersection at or near point 0.5 0.5
ERROR 1: Too many points (619 out of 625) failed to transform, unable to compute output bounds.
ERROR 1: Too many points (619 out of 625) failed to transform, unable to compute output bounds.
Warning 1: Self-intersection at or near point 1177.1507660424079 4565.2604047599352
Warning 1: CRS EPSG:3411 is deprecated. Its non-deprecated replacement EPSG:3413 will be used instead. To use the original CRS, set the OSR_USE_NON_DEPRECATED configuration option to NO.
ERROR 1: Passed object is neither of type string nor bytes
ERROR 1: File /vsimem/test_ogr2ogr_axis_mapping_swap.gfs is not a GMLFeatureClassList document.
ERROR 1: Transaction not established
ERROR 1: Terminating translation prematurely after failed
translation of layer poly (use -skipfailures to skip errors)
Warning 1: The output driver does not seem to natively support StringList type for field strlist. Converting it to String(JSON) instead. -mapFieldType can be used to control field type conversion.
Warning 1: The output driver does not seem to natively support IntegerList type for field intlist. Converting it to String(JSON) instead. -mapFieldType can be used to control field type conversion.
Warning 1: The output driver does not seem to natively support Integer64List type for field int64list. Converting it to String(JSON) instead. -mapFieldType can be used to control field type conversion.
Warning 1: The output driver does not seem to natively support RealList type for field reallist. Converting it to String(JSON) instead. -mapFieldType can be used to control field type conversion.
Warning 1: Value -12.3399999999999999 of field num_5_2 of feature 2 not successfully written. Possibly due to too larger number with respect to field width
Warning 1: Value -12.3000000000000007 of field num_5_2 of feature 2 not successfully written. Possibly due to too larger number with respect to field width
Warning 1: Value -12.3399999999999999 of field num_5_2 of feature 2 not successfully written. Possibly due to too larger number with respect to field width
Warning 1: Value -12.3399999999999999 of field num_5_2 of feature 2 not successfully written. Possibly due to too larger number with respect to field width
Warning 1: Value with a width greater than field width found in record 3 for field num_5_2. This warning will no longer be emitted
Warning 1: Value -12.3399999999999999 of field num_5_2 of feature 2 not successfully written. Possibly due to too larger number with respect to field width
Warning 1: Value with a width greater than field width found in record 3 for field num_5_2. This warning will no longer be emitted
Warning 1: Value with a width greater than field width found in record 3 for field num_5_2. This warning will no longer be emitted
Warning 1: Value with a width greater than field width found in record 3 for field num_5_2. This warning will no longer be emitted
Warning 1: Value with a width greater than field width found in record 3 for field num_5_2. This warning will no longer be emitted
Warning 1: Value with a width greater than field width found in record 3 for field num_5_2. This warning will no longer be emitted
Warning 1: Value -12.3399999999999999 of field num_5_2 of feature 2 not successfully written. Possibly due to too larger number with respect to field width
Warning 1: Value with a width greater than field width found in record 3 for field num_5_2. This warning will no longer be emitted
Warning 1: Value with a width greater than field width found in record 3 for field num_5_2. This warning will no longer be emitted
Warning 1: Value with a width greater than field width found in record 3 for field num_5_2. This warning will no longer be emitted
Warning 1: Value with a width greater than field width found in record 3 for field num_5_2. This warning will no longer be emitted
E:\buildsystem\release-1928\bin\gdal\python\osgeo\osr.py:388: FutureWarning: Neither osr.UseExceptions() nor osr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\osr.py:388: FutureWarning: Neither osr.UseExceptions() nor osr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
Usage: gdal2tiles.py [options] input_file [output]

gdal2tiles.py: error: Input file has unknown SRS.


Use --s_srs EPSG:xyz (or similar) to provide source reference system.
Generating Base Tiles:
Generating Overview Tiles:
E:\buildsystem\release-1928\bin\gdal\python\osgeo\osr.py:388: FutureWarning: Neither osr.UseExceptions() nor osr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\osr.py:388: FutureWarning: Neither osr.UseExceptions() nor osr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\osr.py:388: FutureWarning: Neither osr.UseExceptions() nor osr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\osr.py:388: FutureWarning: Neither osr.UseExceptions() nor osr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
Warning 6: driver MEM does not support creation option BIGTIFF
Warning 6: driver MEM does not support creation option COMPRESS
Warning 6: driver MEM does not support creation option SPARSE_OK
Warning 6: driver MEM does not support creation option TILED
Traceback (most recent call last):
  File "E:\buildsystem\release-1928\bin\gdal\python\osgeo_utils\auxiliary\gdal_argparse.py", line 175, in main
    self.doit(**kwargs)
  File "E:\buildsystem\release-1928\bin\gdal\python\osgeo_utils\gdal_calc.py", line 880, in doit
    return Calc(**kwargs)
  File "E:\buildsystem\release-1928\bin\gdal\python\osgeo_utils\gdal_calc.py", line 132, in Calc
    raise Exception(
Exception: One or several options implying file creation have been provided but Output file exists, must use --overwrite option!
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\gdal.py:291: FutureWarning: Neither gdal.UseExceptions() nor gdal.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
ERROR 4: Unable to open tmp\output_layer.shx or tmp\output_layer.SHX. Set SHAPE_RESTORE_SHX config option to YES to restore or create it.
ERROR 4: Failed to open file tmp\output_layer.shp.It may be corrupt or read-only file accessed in update mode.
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
ERROR 4: Unable to open tmp\output_layer.shx or tmp\output_layer.SHX. Set SHAPE_RESTORE_SHX config option to YES to restore or create it.
ERROR 4: Failed to open file tmp\output_layer.shp.It may be corrupt or read-only file accessed in update mode.
Warning 6: Normalized/laundered field name: 'aaaaaAAAAAb' to 'aaaaaAAAAA'
Warning 6: Normalized/laundered field name: 'aAaaaAAAAAc' to 'aAaaaAAA_1'
Warning 6: Normalized/laundered field name: 'aaaaaAAAABa' to 'aaaaaAAAAB'
Warning 6: Normalized/laundered field name: 'aaaaaAAAABb' to 'aaaaaAAA_2'
Warning 6: Normalized/laundered field name: 'aaaaaAAAABc' to 'aaaaaAAA_3'
Warning 6: Normalized/laundered field name: 'aaaaaAAAABd' to 'aaaaaAAA_4'
Warning 6: Normalized/laundered field name: 'aaaaaAAAABe' to 'aaaaaAAA_5'
Warning 6: Normalized/laundered field name: 'aaaaaAAAABf' to 'aaaaaAAA_6'
Warning 6: Normalized/laundered field name: 'aaaaaAAAABg' to 'aaaaaAAA_7'
Warning 6: Normalized/laundered field name: 'aaaaaAAAABh' to 'aaaaaAAA_8'
Warning 6: Normalized/laundered field name: 'aaaaaAAAABi' to 'aaaaaAAA_9'
Warning 6: Normalized/laundered field name: 'aaaaaAAAABj' to 'aaaaaAAA10'
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
E:\buildsystem\release-1928\bin\gdal\python\osgeo\ogr.py:563: FutureWarning: Neither ogr.UseExceptions() nor ogr.DontUseExceptions() has been explicitly called. In GDAL 4.0, exceptions will be enabled by default.
  warnings.warn(
Usage: gdal2tiles.py [options] input_file [output]

gdal2tiles.py: error: You need to specify at least an input file as argument to the script
Usage: gdal2tiles.py [options] input_file [output]

gdal2tiles.py: error: The provided input file C:\Users\szekeres\AppData\Local\Temp does not exist or is not a file
Usage: gdal2tiles.py [options] input_file [output]

gdal2tiles.py: error: The provided input file foobar.tiff does not exist or is not a file
Usage: gdal2tiles.py [options] input_file [output]

gdal2tiles.py: error: Processing of several input files is not supported.


Please first use a tool like gdal_vrtmerge.py or gdal_merge.py on the files: gdal_vrtmerge.py -o merged.vrt input1.tiff input2.tiff output_folder
Usage: gdal2tiles.py [options] input_file [output]

gdal2tiles.py: error: 'antialias' resampling algorithm is not available.


Install PIL (Python Imaging Library) and numpy.
Usage: gdal2tiles.py [options] input_file [output]

gdal2tiles.py: error: webp_quality should be in the range [1-100]
Usage: gdal2tiles.py [options] input_file [output]

gdal2tiles.py: error: webp_quality should be in the range [1-100]
Usage: gdal2tiles.py [options] input_file [output]

gdal2tiles.py: error: webp_quality should be in the range [1-100]
Usage: gdal2tiles.py [options] input_file [output]

gdal2tiles.py: error: WEBP driver is not available
HDF5-DIAG: Error detected in HDF5 (1.12.0) thread 0:
  #000: E:\buildsystem\src\hdf5\src\H5FD.c line 333 in H5FDunregister(): not a file driver
    major: Invalid arguments to routine
    minor: Inappropriate type
HDF5-DIAG: Error detected in HDF5 (1.12.0) thread 0:
  #000: E:\buildsystem\src\hdf5\src\H5FD.c line 333 in H5FDunregister(): not a file driver
    major: Invalid arguments to routine
    minor: Inappropriate type
NMAKE : fatal error U1077: 'C:\Python\Python310-32\Scripts\pytest.exe' : return code '0x1'
Stop.